Responding to next-generation manufacturing through advanced automation

M2M products automate existing production machines and respond to manufacturing based on new era IoT. “ΣM’’ series is for the automatic collection of the production machine log information and controlling it more efficiently, “Ω measurement” series are for automatic measurement system corresponding to IoT.

ΣM series is a product group to make production  machines in factories correspond to IoT / M2M. We  provide “ΣM i” which is for collecting information on  production machines and retrofitting sensors of old and new makers’ machines, and also the next generation intelligent CNC “ΣM m” which is capable of integrated control of 4-5 machines (up to 32 axes).

Features of ΣM i
It connects to various production machines from multiple manufacturers including old machines. It is a dedicated information collecting device for production logging data. You can also collect information on various types of sensors such as vibration and temperature, etc. overload the sensors all at once, and manage it centrally. It can immediately track equipment and condition defects by adopting FA computer that can patrol and issue a warning at the site. It is truly the director of the production site.

It is a production data collection device that collects
various sensor data collectively. It collects information from processing machines of multiple manufacturers in the factory, as well as various attached sensors such as vibration, temperature and overload, collectively.It is possible to integrate with existing ERP system and our IoT service “M-Karte” series.

Features of ΣM m
This is a next-generation intelligent CNC capable of 
integrated control of up to 32 axes of processing 
machines. If it is a 3-axis processing machine, 4 to 5 units can be controlled simultaneously. It has high degree of freedom to design and operate general-purpose processing machines and special equipment of different manufacturers.
It is equipped with its own high-speed processing module and is able to maximize the performance of processing machines. By updating the electrical equipment and control equipment, machine tools that used to be active will be resurrected. It also supports various network and sensors. It is possible to constantly monitor the operation of the processing machine. 

We also have an integration function with our IoT system “M-Karte” series. We can change any factory with old and new processing machines to the latest IoT / M2M compatible factory.
Features of M-Karte Series

• Event: Easily record defects of molds and products with tablets and smartphones.

• Form:Automatically creates a defect report and creates it as a database.

• Maintenance:We record the maintenance history of molds, production equipment, tools, accuracy records, production information etc.

• Quality:We realize automation of measurement tables and quality statistical processing by interlocking with digital measuring instruments.

• Analysis:It is possible to analyze the history of molds, production defects, and parts defects. You can also accumulate know-how on countermeasures.

• Statistics:Mapping the relationship between production shot count and defect · maintenance timing. Visualize defect elements.

• Inventory:Manage the location and disposal of molds, tools, equipment, and inspection tools in a centralized manner, automating inventory and automating asset management.

 KMC Solutions is also providing contract development of software and hardware. Please contact us for more details.
QR Plate
In the automobile industry, there is a duty to keep molds for 15 years after mass production is cut off, and it is set to 7 years even for commercial products. Currently, the environment where equipment and molds are stored in does not very good with conditions such as lack of temperature and humidity control, and limit of sunlight depending on the time zone.

Therefore, there was a concern that bar codes or QR
codes cannot be read by a reader after a few years
even if they are attached to the mold due to peeling off, dirt and scratches.

In light of these circumstances, KMC has developed
“QR Plate” which has a QR code cut directly on an
aluminum plate and has a surface glass coating. We
have types A to D, boasting overwhelming resistance
compared with conventional printed material and a
guarantee of recognition for about 20 years in presumed mold storage environment.

Company Profile

Company Name KMC Inc.(Head Office
President and CEO Dr. Seiki Sato
Foundation 2010 February 24th
Capital 27 million yen
Address KSP East 606, 3-2-1 Sakado, Takatsu-ku, Kawasaki-shi, Kanagawa 213-0012 Japan
Business profile Consulting, Research and Development,Software Development

Company Profile

Company NameKMC Solutions (M) Sdn Bhd (Malaysia Branch)
President and CEODr. Seiki Sato
DirectorMr. Sim Keng Lee
Foundation2017 August 25th
CapitalMYR 400,000
AddressNo. 12-1, Jalan Kejora 2A, Taman Perindustrian 
Tanjong Minyak Perdana,75260 Melaka, Malaysia
Business profileIoT/M2M Sales, IT Solutions